Human mesh recovery (HMR) models 3D human body from monocular videos, with recent works extending it to world-coordinate human trajectory and motion reconstruction. However, most existing methods remain offline, relying on future frames or global optimization, which limits their applicability in interactive feedback and perception-action loop scenarios such as AR/VR and telepresence. To address this, we propose OnlineHMR, a fully online framework that jointly satisfies four essential criteria of online processing, including system-level causality, faithfulness, temporal consistency, and efficiency. Built upon a two-branch architecture, OnlineHMR enables streaming inference via a causal key-value cache design and a curated sliding-window learning strategy. Meanwhile, a human-centric incremental SLAM provides online world-grounded alignment under physically plausible trajectory correction. Experimental results show that our method achieves performance comparable to existing chunk-based approaches on the standard EMDB benchmark and highly dynamic custom videos, while uniquely supporting online processing. Page and code are available at https://tsukasane.github.io/Video-OnlineHMR/.
论文检索
输入标题、作者或关键词，从 100,903 篇学术成果中精准定位
Deep learning models for medical image analysis often act as "black boxes," seldom aligning with clinical guidelines or explicitly linking decisions to supporting evidence. This is especially critical in Alzheimer's disease (AD), where predictions should be grounded in both anatomical and clinical findings. We present EMAD, a vision-language framework that generates structured AD diagnostic reports with each claim explicitly grounded in multimodal evidence. EMAD uses a hierarchical Sentence-Evidence-Anatomy (SEA) Grounding mechanism: (i) sentence-to-evidence grounding links generated sentences to clinical evidence phrases, and (ii) evidence-to-anatomy grounding localizes corresponding structures on 3D brain MRI. To reduce dense annotation requirements, we propose GTX-Distill, which transfers grounding behavior from a teacher trained with limited supervision to a student operating on model-generated reports. We further introduce Executable-Rule GRPO, a reinforcement fine-tuning scheme with verifiable rewards that enforces clinical consistency, protocol adherence, and reasoning-diagnosis coherence. On the AD-MultiSense dataset, EMAD achieves state-of-the-art diagnostic accuracy and produces more transparent, anatomically faithful reports than existing methods; we will release code and grounding annotations to support future research in trustworthy medical vision-language models.
Controllable driving scene generation is critical for realistic and scalable autonomous driving simulation, yet existing approaches struggle to jointly achieve photorealism and precise control. We introduce HorizonForge, a unified framework that reconstructs scenes as editable Gaussian Splats and Meshes, enabling fine-grained 3D manipulation and language-driven vehicle insertion. Edits are rendered through a noise-aware video diffusion process that enforces spatial and temporal consistency, producing diverse scene variations in a single feed-forward pass without per-trajectory optimization. To standardize evaluation, we further propose HorizonSuite, a comprehensive benchmark spanning ego- and agent-level editing tasks such as trajectory modifications and object manipulation. Extensive experiments show that Gaussian Splatting delivers substantially higher fidelity than alternative 3D representations, and that temporal priors from video diffusion are essential for coherent synthesis. Combining these finding, HorizonSuite establishes a simple yet powerful paradigm for photorealistic, controllable driving simulation. achieving an 83.4% user-preference gain and a 25.19% FID improvement over the second best state-of-the-art method.
Generative models, with their success in image and video generation, have recently been explored for synthesizing effective neural network weights. These approaches take trained neural network checkpoints as training data, and aim to generate high-performing neural network weights during inference. In this work, we examine four representative, well-known methods in this emerging area on their ability to generate novel model weights, i.e., weights that are different from the checkpoints seen during training. Contrary to claims in prior work, we find that these methods synthesize weights largely by memorization: they produce either replicas, or at best simple interpolations, of the training checkpoints. Current methods fail to outperform simple baselines, such as adding noise to the weights or taking a simple weight ensemble, in obtaining different and simultaneously high-performing models. Our further results suggest that the memorization potentially resulted from limited data, overparameterized models, and the underuse of structural priors specific to weight data. Our findings highlight the need for more careful design and evaluation of generative models in new domains.
We present Motion 3-to-4, a feed-forward framework for synthesising high-quality 4D dynamic objects from a single monocular video and an optional 3D reference mesh. While recent advances have significantly improved 2D, video, and 3D content generation, 4D synthesis remains difficult due to limited training data and the inherent ambiguity of recovering geometry and motion from a monocular viewpoint. Motion 3-to-4 addresses these challenges by decomposing 4D synthesis into static 3D shape generation and motion reconstruction. Using a canonical reference mesh, our model learns a compact motion latent representation and predicts per-frame vertex trajectories to recover complete, temporally coherent geometry. A scalable frame-wise transformer further enables robustness to varying sequence lengths. Evaluations on both standard benchmarks and a new dataset with accurate ground-truth geometry show that Motion 3-to-4 delivers superior fidelity and spatial consistency compared to prior work. Project page is available at https://motion3-to-4.github.io/.
Video object detection has gained notable progress with the advent of transformers. While transformers excel at modeling long-range contextual dependencies, the quadratic complexity limits their efficiency in long-sequence processing. In contrast, Mamba offers greater efficiency in modeling long sequences but tends to exhibit relatively limited contextual learning capability compared with transformers, and its application to video object detection remains unexplored. To harness the complementary strengths of transformers and Mamba, we propose a hybrid Transformer-Mamba network for video object detection (TMambaDet), a pioneering framework in this domain that combines the long-range modeling power of transformers with the efficient long-sequence processing capability of Mamba. Our TMambaDet is characterized by three core components: 1) a spatial adaptive deformable transformer encoder to effectively model the long-range dependencies within each frame, enabling intra-frame feature aggregation that substantially improves the spatial feature representations of objects; 2) a temporal cascaded bidirectional Mamba encoder to efficiently capture the long-range dependencies across frames in video sequences with linear complexity, enabling inter-frame feature aggregation that effectively enhances the temporal feature representations of objects; 3) a Mamba entangled transformer decoder to fully explore the interactions between object queries and spatial-temporal features, enabling fine-grained query-feature alignment that effectively enriches the instance-level representations of object queries. We conduct experiments on the ImageNet VID and EPIC-KITCHENS-55 datasets, showing that TMambaDet achieves state-of-the-art results.
Material classification has emerged as a critical task in computer vision and graphics, supporting the assignment of accurate material properties to a wide range of digital and real-world applications. While traditionally framed as an image classification task, this domain faces significant challenges due to the scarcity of annotated data, limiting the accuracy and generalizability of trained models. Recent advances in vision-language foundation models (VLMs) offer promising avenues to address these issues, yet existing solutions leveraging these models still exhibit unsatisfying results in material recognition tasks. In this work, we propose a novel framework that effectively harnesses foundation models to overcome data limitations and enhance classification accuracy. Our method integrates two key innovations:(a) a robust image generation and auto-labeling pipeline that creates a diverse and high-quality training dataset with material-centric images, and automatically assigns labels by fusing object semantics and material attributes in text prompts; (b) a prior incorporation strategy to distill information from VLMs, combined with a joint fine-tuning method that optimizes a pre-trained vision foundation model alongside VLM-derived priors, preserving broad generalizability while adapting to material-specific features.Extensive experiments demonstrate significant improvements on multiple datasets. We show that our synthetic dataset effectively captures the characteristics of real world materials, and the integration of priors from vision-language models significantly enhances the final performance.
Reinforcement learning (RL) has become a powerful tool for post-training visual generative models, with Group Relative Policy Optimization (GRPO) increasingly used to align generators with human preferences. However, existing GRPO pipelines rely on a single scalar reward per sample, treating each image or video as a holistic entity and ignoring the rich spatial and temporal structure of visual content. This coarse supervision hinders the correction of localized artifacts and the modeling of fine-grained perceptual cues. We introduce Visual Preference Policy Optimization (ViPO), a GRPO variant that lifts scalar feedback into structured, pixel-level advantages. ViPO employs a Perceptual Structuring Module that uses pretrained vision backbones to construct spatially and temporally aware advantage maps, redistributing optimization pressure toward perceptually important regions while preserving the stability of standard GRPO. Across both image and video benchmarks, ViPO consistently outperforms vanilla GRPO, improving in-domain alignment with human-preference rewards and enhancing generalization on out-of-domain evaluations. The method is architecture-agnostic, lightweight, and fully compatible with existing GRPO training pipelines, providing a more expressive and informative learning signal for visual generation.
Talking face generation has gained significant attention as a core application of generative models.To enhance the expressiveness and realism of synthesized videos, emotion editing in talking face video plays a crucial role.However, existing approaches often limit expressive flexibility and struggle to generate extended emotions.Label-based methods represent emotions with discrete categories, which fail to capture a wide range of emotions.Audio-based methods can leverage emotionally rich speech signals--and even benefit from expressive text-to-speech (TTS) synthesis--but they fail to express the target emotions because emotions and linguistic contents are entangled in emotional speeches.Images-based methods, on the other hand, rely on target reference images to guide emotion transfer, yet they require high-quality frontal views and face challenges in acquiring reference data for extended emotions (e.g., sarcasm).To address these limitations, we propose Cross-Modal Emotion Transfer (C-MET), a novel approach that generates facial expressions based on speeches by modeling emotion semantic vectors between speech and visual feature spaces.C-MET leverages a large-scale pretrained audio encoder and a disentangled facial expression encoder to learn emotion semantic vectors that represent the difference between two different emotional embeddings across modalities.Extensive experiments on the MEAD and CREMA-D datasets demonstrate that our method improves emotion accuracy by 14% over state-of-the-art methods, while generating expressive talking face videos--even for unseen extended emotions. Code, checkpoint, and demo are available at https://chanhyeok-choi.github.io/C-MET/.
While Multimodal Large Language Models (MLLMs) excel on benchmarks, their processing paradigm differs from the human ability to integrate visual information. Unlike humans who naturally bridge details and high-level concepts, models tend to treat these elements in isolation. Prevailing evaluation protocols often decouple low-level perception from high-level reasoning, overlooking their semantic and causal dependencies, which yields non-diagnostic results and obscures performance bottlenecks. We present VCU-Bridge, a framework that operationalizes a human-like hierarchy of visual connotation understanding: multi-level reasoning that advances from foundational perception through semantic bridging to abstract connotation, with an explicit evidence-to-inference trace from concrete cues to abstract conclusions. Building on this framework, we construct HVCU-Bench, a benchmark for hierarchical visual connotation understanding with explicit, level-wise diagnostics. Comprehensive experiments demonstrate a consistent decline in performance as reasoning progresses to higher levels. We further develop a data generation pipeline for instruction tuning guided by Monte Carlo Tree Search (MCTS) and show that strengthening low-level capabilities yields measurable gains at higher levels. Interestingly, it not only improves on HVCU-Bench but also brings benefits on general benchmarks (average +2.53%), especially with substantial gains on MMStar (+7.26%), demonstrating the significance of the hierarchical thinking pattern and its effectiveness in enhancing MLLM capabilities.
Detection Transformer (DETR) has redefined object detection by casting it as a set prediction task within an end-to-end framework. Despite its elegance, DETR and its variants still rely on fixed learnable queries and suffer from severe query utilization imbalance, which limits adaptability and leaves the model capacity underused. We propose PaQ-DETR (Pattern and Quality-Aware DETR), a unified framework that enhances both query adaptivity and supervision balance. It learns a compact set of shared latent patterns capturing global semantics and dynamically generates image-specific queries through content-conditioned weighting. In parallel, a quality-aware one-to-many assignment strategy adaptively selects positive samples based on localization-classification consistency, enriching supervision and promoting balanced query optimization. Experiments on COCO, CityScapes, and other benchmarks show consistent gains of 1.5%-4.2% mAP across DETR backbones, including ResNet and Swin-Transformer. Beyond accuracy improvement, our method provides interpretable insights into how dynamic patterns cluster semantically across object categories.
Lifelong learning aims to preserve knowledge acquired from previous tasks while incorporating knowledge from a sequence of new tasks. However, most prior work explores only streams of homogeneous tasks (*e.g.*, only classification tasks) and neglects the scenario of learning across heterogeneous tasks that possess different structures of outputs. In this work, we formalize this broader setting as lifelong heterogeneous learning (LHL).Departing from conventional lifelong learning, the task sequence of LHL spans different task types, and the learner needs to retain heterogeneous knowledge for different output space structures.To instantiate the LHL, we focus on LHL in the context of dense prediction (LHL4DP), a realistic and challenging scenario.To this end, we propose the Heterogeneity-Aware Distillation (HAD) method, an exemplar-free approach that preserves previously gained heterogeneous knowledge by self-distillation in each training phase.The proposed HAD comprises two complementary components, including a distribution-balanced heterogeneity-aware distillation loss to alleviate the global imbalance of prediction distribution and a salience-guided heterogeneity-aware distillation loss that concentrates learning on informative edge pixels extracted with the Sobel operator.Extensive experiments demonstrate that the proposed HAD method significantly outperforms existing methods in this new scenario.
Continual Learning (CL) aims to train neural networks on a dynamic stream of tasks without forgetting previously learned knowledge. Among optimization-based approaches, C-Flat has emerged as a promising solution due to its plug-and-play nature and its ability to encourage uniformly low-loss regions for both new and old tasks. However, C-Flat requires three additional gradient computations per iteration, imposing substantial overhead on the optimization process. In this work, we propose C-Flat Turbo, a faster yet stronger optimizer that significantly reduces the training cost. We show that the gradients associated with first-order flatness contain direction-invariant components relative to the proxy-model gradients, enabling us to skip redundant gradient computations in the perturbed ascent steps. Moreover, we observe that these flatness-promoting gradients progressively stabilize across tasks, which motivates a linear scheduling strategy with an adaptive trigger to allocate larger turbo steps for later tasks. Experiments show that C-Flat Turbo is 1.0x to 1.25x faster than C-Flat across a wide range of CL methods, while achieving comparable or even improved accuracy.
Neural Dynamic GI: Random-Access Neural Compression for Temporal Lightmaps in Dynamic Lighting Environments
PDF ↗High-quality global illumination (GI) in real-time rendering is commonly achieved using precomputed lighting techniques, with lightmap as the standard choice. To support GI for static objects in dynamic lighting environments, multiple lightmaps at different lighting conditions need to be precomputed, which incurs substantial storage and memory overhead.To overcome this limitation, we propose Neural Dynamic GI (NDGI), a novel compression technique specifically designed for temporal lightmap sets. Our method utilizes multi-dimensional feature maps and lightweight neural networks to integrate the temporal information instead of storing multiple sets explicitly, which significantly reduces the storage size of lightmaps. Additionally, we introduce a block compression (BC) simulation strategy during the training process, which enables BC compression on the final generated feature maps and further improves the compression ratio. To enable efficient real-time decompression, we also integrate a virtual texturing (VT) system with our neural representation. Compared with prior methods, our approach achieves high-quality dynamic GI while maintaining remarkably low storage and memory requirements, with only modest real-time decompression overhead. To facilitate further research in this direction, we will release our temporal lightmap dataset precomputed in multiple scenes featuring diverse temporal variations.
Large-scale deep learning models for physical AI applications depend on diverse training data collection efforts. These models and correspondingly, the training data, must address the different evaluation criteria necessary for the models to be deployable in real-world environments. Data selection policies can guide the development of the training set, but current frameworks do not account for the ambiguity in how data points affect different metrics. In this work, we propose Mixture Optimization via Scaling-Aware Iterative Collection (MOSAIC), a general data selection framework that operates by: (i) partitioning the dataset into domains; (ii) fitting neural scaling laws from each data domain to the evaluation metrics; and (iii) optimizing a data mixture by iteratively adding data from domains that maximize the change in metrics. We apply MOSAIC to autonomous driving (AD), where an End-to-End (E2E) planner model is evaluated on the Extended Predictive Driver Model Score (EPDMS), an aggregate of driving rule compliance metrics. Here, MOSAIC outperforms a diverse set of baselines on EPDMS with up to 80% less data.
Conventional vision-language models (VLMs) struggle to interpret scenes captured under adverse conditions (e.g., low light, high dynamic range, or fast motion) because standard RGB images degrade in such environments. Event cameras provide a complementary modality: they asynchronously record per-pixel brightness changes with high temporal resolution and wide dynamic range, preserving motion cues where frames fail. We propose RE-VLM, the first dual-stream vision-language model that jointly leverages RGB images and event streams for robust scene understanding across both normal and challenging conditions. RE-VLM employs parallel RGB and event encoders together with a progressive training strategy that aligns heterogeneous visual features with language. To address the scarcity of RGB-Event-Text supervision, we further propose a graph-driven pipeline that converts synchronized RGB-Event streams into verifiable scene graphs, from which we synthesize captions and question-answer (QA) pairs. To develop and evaluate RE-VLM, we construct two datasets: PEOD-Chat, targeting illumination-challenged scenes, and RGBE-Chat, covering diverse scenarios. On captioning and VQA benchmarks, RE-VLM consistently outperforms state-of-the-art RGB-only and event-only models with comparable parameter counts, with particularly large gains under challenging conditions. These results demonstrate the effectiveness of event-augmented VLMs in achieving robust vision-language understanding across a wide range of real-world environments. Code and datasets are available at https://github.com/bupt-ai-cz/RE-VLM.
Existing video editing methods face a critical trade-off: expert models offer precision but rely on task-specific priors like masks, hindering unification; conversely, unified temporal in-context learning models are mask-free but lack explicit spatial cues, leading to weak instruction-to-region mapping and imprecise localization. To resolve this conflict, we propose VideoCoF, a novel Chain-of-Frames approach inspired by Chain-of-Thought reasoning. VideoCoF enforces a "seeing, reasoning, then editing" procedure by compelling the video diffusion model to first predict reasoning tokens (edit-region latents) before generating the target video tokens. This explicit reasoning step removes the need for user-provided masks while achieving precise instruction-to-region alignment and fine-grained video editing. Furthermore, we introduce a RoPE alignment strategy that leverages these reasoning tokens to ensure motion alignment and enable length extrapolation beyond the training duration. We demonstrate that with a minimal data cost of only 50k video pairs, VideoCoF achieves state-of-the-art performance on VideoCoF-Bench, validating the efficiency and effectiveness of our approach. Our code, weight, data are available at https://github.com/knightyxp/VideoCoF.
Music style transfer (MST) aims to reinterpret existing musical pieces in new stylistic forms while maintaining their melodic coherence. Conventional approaches conditioned on text or audio overlook the profoundly multimodal character of musical style. Visual ambience -- reflected in color, lighting, and composition -- encodes affective attributes that parallel timbre, rhythm, and harmony, which, however, remain underexplored in MST context. We introduce a flow-based, inversion-free framework for multimodal music style transfer that unifies textual and visual guidance. Our approach tackles two challenges: (1) capturing cross-modal semantics beyond language through a dual-encoder fusion module that merges CLIP- and ViT-derived embeddings, and (2) preserving melodic identity using a differentiable normalized chroma constraint that regulates pitch-class consistency along the generative flow. We reorganize and extend the MeLBench and MusicCaps collections into a genre-structured multimodal dataset to support style-aware analysis. Quantitative and perceptual evaluations demonstrate that our approach achieves superior control, structural fidelity, and cross-modal expressiveness, underscoring the role of visual perception in music generation. Our demo is available online.
Learning directly from boundary representations (B-reps) has significantly advanced 3D CAD analysis. However, state-of-the-art B-rep learning methods rely on absolute coordinates and normals to encode global context, making them highly sensitive to rotations. Our experiments reveal that models achieving over 95% accuracy on aligned benchmarks can collapse to as low as 10% under arbitrary SO(3) rotations. To address this, we introduce FoV-Net, the first B-rep learning framework that captures both local surface geometry and global structural context in a rotation-invariant manner. Each face is represented by a Local Reference Frame (LRF) UV-grid that encodes its local surface geometry, and by Field-of-View (FoV) grids that capture the surrounding 3D context by casting rays and recording intersections with neighboring faces. Lightweight CNNs extract per-face features, which are propagated over the B-rep graph using a graph attention network. FoV-Net achieves state-of-the-art performance on B-rep classification and segmentation benchmarks, demonstrating robustness to arbitrary rotations while also requiring less training data to achieve strong results.
Training vision-language models (VLMs) for complex reasoning remains a challenging task, i.a. due to the scarcity of high-quality image-text reasoning data. Conversely, text-based reasoning resources are abundant and scalable, but it is still an open question how to leveraging them for VLM reasoning. To address this problem, we propose VOLD, a framework to transfer reasoning capabilities from text-only teacher models to VLM student models. To this end, VOLD combines reinforcement learning via Group Relative Policy Optimization (GRPO) with on-policy distillation, which allows the student reasoning traces to be guided by the teacher model, resulting in a significant gain over using GRPO alone.We further show that a cold-start alignment is essential for an effective transfer during the online training phase in this scenario and that without sufficient distributional alignment between teacher and student, on-policy distillation fails to provide meaningful guidance.We evaluate VOLD across diverse benchmarks including MMMU-Pro, MathVision, MathVista, and LogicVista, showing that VOLD outperforms the baseline model significantly and improves over the state of the art by a margin.Our ablation shows the importance of a cold-start alignment via SFT for on-policy distillation with a text-only teacher